Git over I2P for Users

Tutorial for setting up git access through an I2P Tunnel. This tunnel will act as your access point to a single git service on I2P.

First: Set up an account at a Git service

To create your repositories on a remote git service, sign up for a user account at that service. Of course it’s also possible to create repositories locally and push them to a remote git service, but most will require an account and for you to create a space for the repository on the server. Gitlab has a very simple sign-up form:

These are generic instructions for any in-i2p Git instance with HTTP and SSH gateways. If you intend to contribute to I2P, you should create an account at the I2P gitlab, which is open to the community. Account registration may take a few days to complete, as the admin needs to sort through a large number of spam registrations. You can help this by getting in touch with the admin to confirm you are human using the instructions on the home page.

• Dans I2P - (http://git.idk.i2p)
• Hors d'I2P - (https://i2pgit.org)

Second: Create a project to test with

To make sure the setup process works, it helps to make a repository to test with from the server, and for the sake of this tutorial, we’re going to use a fork of the I2P router. First, browse to the i2p-hackers/i2p.i2p repository:

Then, fork it to your account.

Third: Set up your git client tunnel

To have read-write access to my server, you’ll need to set up a tunnel for your SSH client. As an example, we’re going to use the HTTP tunnel instead, but if all you need is read-only, HTTP/S cloning, then you can skip all this and just use the http_proxy environment variable to configure git to use the pre-configured I2P HTTP Proxy. For example:

http_proxy=http://localhost:4444 git clone http://gittest.i2p/i2p-developer/i2p.i2p

Then, add the address you will be pushing and pulling from. Note that this example address is for Read-Only HTTP-over-I2P clones, if your admin does not allow the git HTTP(Smart HTTP) protocol, then you will need to get the SSH clone base32 from them. If you have an SSH clone base32, substitute it for the base32 in this step, which will fail.

Pick a port to forward the I2P service to locally.

I use it alot, so I start my client tunnel automatically, but it’s up to you.

When you’re all done, it should look alot like this.

Fourth: Attempt a clone

Now your tunnel is all set up, you can attempt a clone over SSH.

Git Privacy: Committing to git adds a timestamp to git commit messages, which may be configured to reflect your local time zone. To enforce the use of UTC for all commits, you are advised to use a git alias, such as:

git config --global alias.utccommit '!git commit --date="$(date --utc +%Y-%m-%dT%H:%M:%S%z)"'

git commit

git utccommit

GIT_SSH_COMMAND="ssh -p 7442" \
    git clone git@127.0.0.1:i2p-developer/i2p.i2p

You might get an error where the remote end hangs up unexpectedly. Unfortunately git still doesn’t support resumable cloning. Until it does, there are a couple fairly easy ways to handle this. The first and easiest is to try and clone to a shallow depth:

GIT_SSH_COMMAND="ssh -p 7442" \
    git clone --depth 1 git@127.0.0.1:i2p-developer/i2p.i2p

Once you’ve performed a shallow clone, you can fetch the rest resumably by changing to the repo directory and running:

git fetch --unshallow

At this point, you still don’t have all your branches yet. You can get them by running the following commands:

git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*"
git fetch origin

Which tells git to alter the repository configuration so that fetching from origin fetches all branches.

If that doesn’t work, you can try opening the tunnel configuration menu and adding some backup tunnels.

If that doesn’t work, then the next easy thing to try is to decrease the tunnel length. Don’t do this if you believe you are at risk of your code-contribution activity being de-anonymized by a well-resourced attacker seeking to run many malicious nodes and control your whole path. If that sounds unlikely to you then you can probably do it safely.

Suggested Workflow for Developers!

Revision control can make your life easier, but it works best if you use it well! In light of this, we strongly suggest a fork-first, feature-branch workflow as many are familiar with from Github. In such a workflow, the master branch is used as a sort of “Trunk” for updates and is never touched by the programmmer, instead, all changes to the master are merged from branches. In order to do set up your workspace for this, take the following steps:

• Never make changes to the Master Branch. You will be using the master branch to periodially obtain updates to the official source code. All changes should be made in feature branches.

1. Set up a second remote in your local repository using the upstream source code.

   git remote add upstream git@127.0.0.1:i2p-hackers/i2p.i2p

2. Pull in any upstream changes on your current master:

   git pull upstream master

3. Before making any changes to the source code, check out a new feature branch to develop on:

   git checkout -b feature-branch-name

4. When you’re done with your changes, commit them and push them to your branch

   git commit -am "I added an awesome feature!"
   git push origin feature-branch-name

5. Submit a merge request. When the merge request is approved and brought into the upstream master, check out the master locally and pull in the changes:

   git checkout master
   git pull upstream master

6. Whenever a change to the upstream master(i2p-hackers/i2p.i2p) is made, you can update your master code using this procedure as well.

   git checkout master
   git pull upstream master

The git utccommit alias solution to git timestamp issue was arrived at from the information first published here: saebamini.com.